AI automation for Architecture Firms

In a small practice the principal is the designer, the project manager, the billing department and the marketing team. The drawings go out on time. The fee comes in weeks later, after a run of awkward emails. Proposals get written at night and the CA log lives in Excel. We build the AI that chases the money and handles the paperwork, so the principal gets back to the drawings.

The numbers

What the friction is costing.

34 days

for the average architecture and engineering firm to get paid, against 22 for top firms and 42 for low performers

Monograph 2026 A&E Business Benchmarks (Monograph sells practice software)
60%

of small architecture firms track billable hours precisely. Four in ten do not

AIA Tech Culture Report, via Monograph
71%

of AEC firms say they are submitting more proposals this year than last

Unanet 2026 AEC Inspire Report (vendor survey), via Building Design + Construction

Where the time goes, and what we build instead.

The drawings went out weeks ago and the fee has not come in. The principal is the one chasing it, and the client who pays last is always the one asking where the drawings are.

We build a chasing layer on top of QuickBooks or Monograph. The aging report drives a reminder schedule, polite at first and firmer as the days stack up. The agent drafts the harder follow-ups, including the note that final drawings release on payment, for you to approve. Nobody has to remember who owes what.

Month end means building every invoice by hand. Pull the hours by phase, work out percent complete, write the narrative, export, email. Invoices go out late, so cash comes in late.

We automate the assembly. Hours come out of Harvest, BQE Core or Monograph by phase, the agent drafts the percent complete narrative against the fee, and a ready invoice lands for your review. You check it and send it. Billing day stops eating the week.

Extra work gets coded to a base fee phase. The client asked for a revised layout, the hours went into design development, and the additional service never reached an invoice.

We build a check that runs before the invoice goes out. It reads the timesheet notes and client emails for scope changes, compares them with the contract phases, and flags anything that looks like an additional service. You decide what to bill. The work you did stops going out free.

Fee proposals and RFQ responses get written after hours. Every one starts from a blank page or last year's file, and the bios, project sheets and fee schedule get rebuilt each time.

We build a proposal agent that pulls from your past projects, team bios, project sheets and fee schedule to draft the proposal or qualifications package for the brief in front of you. You set the fee and the approach. The assembly work is done before you sit down.

Construction administration lives in email and a master CA log in Excel. RFIs, submittals, ASIs and change orders come in from every direction, and someone has to keep the log straight and chase the consultants.

We build an agent that reads the RFI and submittal emails, logs each one in your master CA log with dates and status, drafts the transmittal and chases consultants when a response runs late. It never answers a design question. Those come to you, already logged.

Timesheets come in late or not at all, so the hours never match the fee and nobody knows which project is losing money until it is too late.

We automate the nudges and draft the entries from each person's calendar and project folders, so staff check a drafted week and confirm it. Clean hours feed the invoice and the additional services check. You see which jobs are over fee while there is still time to act.

The principal holds the whole business together. Design, client calls, billing, proposals, CA. Every new job means longer hours for the principal.

We take the repeatable back office work off the principal, one build at a time, starting with the money. The practice runs without you in the middle of every invoice and every log entry. You get your evenings and your design time back.

What to automate first.

You do not automate everything at once. You start where the time is worst and the payback is clearest. In a architecture firm, that order tends to look like this.

01
Invoice chasing and collections

Start here. It is money, it sits with the principal, and it is a small build that touches nothing else. Small firms bill hourly far more than large ones and live on collections. We build the reminder schedule from your QuickBooks or Monograph aging report, with the agent drafting the harder emails and the drawings on payment note for you to approve. You stop being the one who chases.

02
Invoice assembly and additional services

Do this next. Hours get pulled by phase, the percent complete narrative gets drafted, and anything that looks like extra work coded to a base fee gets flagged before the invoice goes out. Invoices leave on time and the work you did outside scope reaches the bill. It sits on the same data as the chasing, so it builds quickly once that is live.

03
Fee proposals and RFQ responses

Then this. Proposal volume is rising across the industry and every response gets rebuilt from old files. The agent drafts the proposal or qualifications package from your past projects, bios and fee schedule. You set the fee and the approach. We build it third because it pays off most once the billing side is no longer eating your evenings.

What we will not automate.

Plenty of the work should stay human. If a tool promises to take this off you, close the tab.

The design

The drawings, the design decisions and the client conversations about them. This is the practice, and it is your name on it. We automate the business around the design, never the design itself.

RFI answers and anything under your stamp

The agent logs RFIs, files submittals and chases consultants. It never answers a design question or responds on a technical matter. Anything with professional liability attached comes to a licensed architect, already logged and ready to review.

The fee and the client relationship

The agent can assemble a proposal and draft a payment reminder. The fee you charge, the scope you agree and the decision to hold drawings for payment stay with the principal. Every client facing message goes out with a human approval until you decide otherwise.

A tool, a hire, or a build?

Three ways architecture firms try to fix this. Here is what each one does.

Off-the-shelf AI, an in-house hire, or a Nifty build: a comparison for architecture firms.
Off-the-shelf AIAn in-house hireA Nifty build
What it isA general tool your team prompts by hand.A full-time AI or ops person on the payroll.Automation built into the tools you already use.
What it costsCheap per seat. The real cost is the hours spent steering it.$80k to $120k a year, plus ramp and management.Fixed scope from $3,000. You own it.
Time to valueInstant, but shallow.Three months to ramp.One agent or automation, live in days to weeks.
What it changesHelps one person work faster. The process stays the same.A lot, eventually, if you keep them busy.How the whole team works.
Who runs itEach person, every time.Them, until they leave.It runs itself. You keep it, we keep it sharp.
In practice

What a build looks like here.

We are new, so this is the shape of a typical build. The practice below is an illustration. It is the pattern we build against in a small architecture firm, end to end.

The firm

A six-person residential and small commercial practice. The principal, two project architects, two designers and a part-time office manager. Time in Harvest, invoices in QuickBooks Online, CA tracked in an Excel log.

Before

Invoices go out a week after month end because the principal builds each one from Harvest exports. A handful of clients pay late every month, and the principal chases them personally between design reviews. Revisions requested over email get logged to the current phase and never billed. Proposals get written on Sunday nights.

What we build

Two things, built on top of Harvest and QuickBooks Online. A chasing layer that runs a reminder schedule from the aging report and drafts the harder follow-ups for approval. And invoice assembly that pulls hours by phase, drafts the narrative and flags likely additional services before anything goes out. Live in days to weeks depending on scope, fixed price, success metric agreed first: invoices out on time and fewer days waiting to get paid.

After

Invoices land for review on the last day of the month. Overdue clients get a reminder on schedule, and the principal stops writing them by hand. Extra work shows up on the bill as its own line. The principal stops being the billing department and gets the evenings back for design and proposals.

Operator-led and built into how you work.

01.
Start with a free audit.

Book a free audit call and talk us through the one workflow eating the most time. We come back with a demo of what we would build and a straight worth-it or not.

02.
We build the thing.

A fixed-scope build. One agent or automation, live in days to weeks. We agree the success metric in writing first, in hours saved or dollars back. Then we build it into your tools.

03.
We stay through it.

Maintenance keeps it running after the warranty. The Embed puts us inside the business to keep improving it. Both optional. You run it. We keep it sharp.

Book a free audit for your architecture firm

Before you book.

What architecture firms ask before they book an audit call.

The business side of the practice, never the design. The builds that pay back fastest are invoice chasing, invoice assembly, additional services flagging, fee proposal drafting and the construction administration log. Start with the money. The average A&E firm waits 34 days to get paid, and in a small practice it is the principal who chases. We build a layer on top of QuickBooks or Monograph that runs the reminder schedule from the aging report and drafts the awkward emails for you to approve. The same approach handles invoice narratives and the RFI log. The drawings, the design calls and anything under your stamp stay with you.

No. In a practice of five or ten, there is nobody spare to replace. The principal is already doing three jobs. What we take away is the work nobody trained for: chasing invoices, rebuilding the same proposal, keeping an Excel log in step with a hundred emails. Your designers keep designing and your project architects keep running jobs. They just stop spending Friday afternoon on admin. If you have an office manager holding billing together, the build moves what they hold in their head into a system, which also means the practice does not stall when they take a week off.

No. We build around what you already run, whether that is Monograph, BQE Core, ArchiOffice, Deltek Ajera, or Harvest and QuickBooks Online. Your practice platform is fine at holding the data. The friction is in the gaps between it, the inbox and the accounting system, and that is where we work. Some platforms are adding their own AI time and billing features, and that is good news. We build the layer across email, accounting and the platform that none of them cover on their own. Your CAD and BIM tools are untouched. We do not go near the drawings.

Every build is fixed price, typically between $3,000 and $20,000 depending on scope. A single workflow on one system, like invoice chasing from QuickBooks, can be live in days. An agent working across your inbox, practice platform and accounting takes a few weeks. You get the date with the price, and the price does not move. Before we start, we agree the success metric in writing, such as days to get paid or hours back at month end. Payment is half on signature and half on handover. You get the build, a documented handover and a 30-day warranty. After that, Maintenance keeps it running, or the monthly Embed has us improving it as the practice changes. Neither is a condition of the build.

Start with the free audit. Book a call and walk us through the job that eats your week, whether that is chasing fees, building invoices or writing proposals. We come back with a demo of what we would build, what it should give back in hours and cash, and a straight answer on whether it is worth it. If it is not, we say so and explain why. We would rather lose the build than ship something that does not move a number. No pitch on the call, no obligation after it. It costs you one conversation.

Get the admin off the desk.

Book a free audit call on one workflow. We come back with a demo of what we would build, with no pitch.